Tel: 567-221-0615 | Contact Us | Hours 9:00AM-5:30PM Mon-Fri

My Cart:

0 item(s)
You have no items in your shopping cart.

0

Welcome to our online store!

Thermo Shandon Cryotome FE A78900002 Cryostat Microtome Tissue Sectioning

Fully-functional and Protected by our 90-Day Warranty

Quick Overview

Specifications

Manufacturer

Thermo Shandon

Model

Cryotome FE

Part No.

A78900002

Total specimen advance

25 mm

Section thickness range

1 to 20 µm in increments of 1 µm
20 to 60 µm in increments of 5 µm

Cutting stroke

57 mm

Retraction

40 µm on upward stroke

Cryochamber

at an ambient temperature of ≤+25°C

Cryochamber temperature

0 to -35°C

Cryobar temperature

-55°C (minimum)(adjustable)

Power requirements

115 V, 60 Hz, 1380 VA

Dimensions (W x D x H)

33 x 29.5 x 47 in (including handwheel)

Weight

125 kg (275 lbs)

$5,299.95
AdID: 15545

Availability: In stock

Details

Fully-Functional Thermo Shandon Cryotome FE - Refrigeration Recharged and Ready for Operation

Protected by our 90-Day Warranty

This Thermo Shandon Cryotome FE has been thoroughly inspected and tested by our technician, confirming the chamber to reach -35°C and the cryobar to reach -60°C, both meeting manufacturer temperature specification.


This cryostat is in good physical condition with smooth handwheel and knife assembly operation and chamber surfaces showing only minor wear from use. Knife holder assembly, anti-roll plate, specimen discs, and a power cable are included.


All Components Inspected and Tested by Technical Staff

Our technician tested each component of this cryotome, from refrigeration all the way down to the micron selector. No feature is too small for our technicians to inspect and test. We guarantee this cryotome fully-functional and ready for operation the day you receive it.


Tissue sectioning and supporting features tested:


Handwheel and knife assembly operation is smooth
Touchscreen interface is responsive and bright
Specimen travel and micron selector tested
Chamber lamp tested

Chamber and Cryobar Cooling to Specification

Refrigeration systems often deteriorate over time so that’s why fully recharge the refrigeration system by removing the refrigerant, putting a strong vacuum on the system to remove any debris and water that has accumulated, and finish the process by filling it with new refrigerant.


We thoroughly tested this system to ensure the refrigeration is operating at manufacturer specification. The chamber and cryobar cooling on this cryostat have been tested and confirmed to meet manufacturer specifications.


Instrument testing and services include the following:


Refrigeration recharged
Chamber temperature tested to -35°C
Cryobar temperature tested to -60°C
Exterior and chamber surfaces cleaned

Equipped and Read for Operation in your Lab

This cryotome is clean and ready for tissue sectioning. Blades will need to be acquired separately. All that is included is shown in the photos.


The following is included with this system:


Thermo Shandon Cryotome FE
Knife holder assembly
Anti-roll plate
4x Specimen discs
Power Cable

From a Professional Dealer to your Facility

New Life Scientific is an experienced scientific vendor with a history of positive customer experiences (just check out our eBay reputation!). You can have confidence in our technical evaluations and our warranty knowing that we have actual in-house technicians who inspect, test, service, and repair the various instruments we receive.


After examination and thorough cleaning, products often leave our shop meeting manufacturer specs.


When you buy from New Life Scientific, you’re free to contact us at any time for after-sales support concerning any questions or issues that may arise, even after your warranty expires.