Tel: 567-221-0615 | Contact Us | Hours 9:00AM-5:30PM Mon-Fri

My Cart:

0 item(s)
You have no items in your shopping cart.


Welcome to our online store!

Thermo GasTech Innova Series EEx ia IIC T4 Gas Monitor For Parts

AdID: 14646

Availability: In stock


Thermo GasTech Innova Series EEx ia IIC T4
Powers On with a Sensor Fail Alarm
In Good Cosmetic Condition with Normal Wear

Being Sold As Parts 
It May Just
Need Calibrated

This gas monitor uses 4 “D” Batteries which can be Alkaline or NI-Cd. When in working condition it can detect one to four different types of gases, depending on what it is calibrated for.
The Alarm circuit alerts you to dangerous gas conditions, low battery conditions, sensor failure, data log full, calibration reminder, and sample-draw pump failures.

Technician Tested
Unit powers on but did not pass self test. A sensor failed alarm is sounded, we do not have any calibration kits, so we could not test any further. Calibration may be all this needs.


Thermo GasTech


EEx ia IIC T4

Serial Number


Power Requirement

4 “D” Batteries Alkaline or Ni-Cd


Responding to Sensor Alarms

A sensor failure alarm can occur during normal operation or calibration. Alarms that occur during calibration are described in Chapter 5, Calibration.
1. Examine the display screen to determine which sensor is failing. The failing sensor displays “XXX” instead of the gas reading for a sensor that has failed an air adjust, calibration, or gas missing sensor.
2. Perform an air adjust if the sensor(s) continues to fail, perform a calibration, see Chapter 5, Calibration.
3. If the sensor(s) continue to fail, replace the sensor(s), see Chapter 6, Replacing Sensors.
4. You can enter the Innova user program and change the sensor status setting to “OFF”. All information for an absent sensor is removed from the normal screen and recorded as XXX in the data log.