Tel: 567-221-0615 | Contact Us | Hours 9:00AM-5:30PM Mon-Fri

My Cart:

0 item(s)
You have no items in your shopping cart.


Welcome to our online store!

Caron Reach-In CO2 Incubator Model 6024-1 In-Vitro Mammal Tissue Cell Culture

Tested to +37C and Guaranteed with a 90-Day Warranty
$4,896.95 $3,917.56
AdID: 16561

Availability: In stock


Caron Reach-In CO2 Incubator in Good Condition with 4 Stainless Steel Shelves

Easy to install, use, and maintain, this Caron reach-in CO2 incubator has been thoroughly inspected by our technician and tested to confirm the heating system is functional, reaching and holding interior temperature steady at +37C within 0.1C.

Manufactured in 2010, this CO2 incubator is in good physical condition with a cold rolled steel, powder coated exterior with a few small scuffs and some minor wear from use. It has a heated triple pane outer glass door and an easy-to-clean stainless steel interior with four adjustable stainless steel shelves.

If youre looking for a cost-effective, high capacity CO2 incubator with relative humidity control and a simple, user-friendly design and control interface, then youve found the right one.

Inspected and Tested by our Technical Staff

Our technical staff inspected and tested this CO2 incubator, confirming the heating system to bring the incubator to +37C, holding within 0.1C.

The CO2 and humidity system could not be fully tested without a connected CO2 and water supply, but the water pump and solenoid for the CO2 supply have been confirmed to activate when those systems are powered on.

Ready for Operation at Full Capacity

This Caron CO2 incubator comes with four spacious shelves and a power cable so you can immediately begin using this system to its full capacity. Tubing for the CO2 supply and distilled/deionized water supply will need to be provided by the end user. One of the side port stoppers is missing.

You Will Receive The Following:

- Caron Reach-In CO2 Incubator 6024-1
- 4x Stainless Steel Shelves
- Power Cable

Easy-to-Clean and Maintain

All interior surfaces, including the four adjustable shelves, are made of stainless steel, making the interior surfaces not only resistant to corrosion, but also remarkably fast and easy to clean.

From a Professional Dealer to your Lab

New Life Scientific is an experienced scientific vendor with a history of positive customer experiences (just check out our reviews!). You can have confidence in our technical evaluations and our warranty knowing that we have actual in-house technicians who inspect, test, service, and repair the various instruments we receive.

After examination and thorough cleaning, products often leave our shop meeting manufacturer specs. When you buy from New Life Scientific, youre free to contact us at any time for after-sales support concerning any questions or issues that may arise, even after your warranty expires.




Mfg. Date

January 25, 2010



Serial No.


Temperature range

ambient plus 10C to 60C

Temperature control


Temperature uniformity


Temperature sensor


Humidity range

ambient to 95% RH

Humidity control

3% RH

Humidity sensor


CO2 range

0-20% CO2

CO2 control

0.1% CO2

CO2 sensor



115 VAC, 60 Hz, 11.8 FLA

Interior dimensions (W x D x H)

32.0 x 27.0 x 52.7 in

Exterior dimensions (W x D x H)

35.5 x 33.3 x 77.1 in