Tel: 567-221-0615 | Contact Us | Hours 9:00AM-5:30PM Mon-Fri

My Cart:

0 item(s)
You have no items in your shopping cart.


Welcome to our online store!

Used: Bio-Rad Bio-Plex FLEXMAP 3D Suspension Array Multiplexing System

In Good Condition and Backed by 90-Day Warranty

Quick Overview

Backed by a 90-Day Warranty - Your instrument works, or we repair, refund, or replace.

Used - A pre-owned and tested product that may show signs of wear.

Flat-Rate Freight ($285) - The instrument is web-wrapped to a pallet with shrink-wrap.< br/>

AdID: 17069

Availability: In stock


Bio-Rad Bio-Plex FLEXMAP 3D Suspension Array System

Engineered to handle the workload of labs on the busier end of the spectrum, the Bio-Plex 3D can quantify up to 500 analytes per sample in just 20 minutes.

We've got a used 3D system that has been inspected and tested with no major issues found. Backed by our 90-day warranty and post-sale support, you've got nothing to lose with this system.

Interested? Here's more details 👇

System Initializes and Pumps Work Well

After its initial cleaning and visual inspection, one of our technicians powered the system on and noted that it initialized properly. He then initiated a run and confirmed that fluid moves through the system smoothly.

Although we were unable to test every single aspect of this system, we believe that all of it will work without issue once the syringes have been replaced and it's hooked up to a PC running the Bio-Plex Manager software.

***Please note that the syringes will need to be replaced as they leak when pumping.

Manufactured October 2011

In Good Condition, Inside & Out

Aside from some expected signs of usage and a few occasional scuffs on the exterior, this Bio-Plex 3D is very clean and has been maintained well.

High-Efficiency Multiplexing for the Lab with Demand

With its 20-minute turnaround time and 500-analyte measuring capacity, Bio-Rad's solution to the multiplexing needs of the high-throughput lab is unveiled in the Bio-Plex 3D. 

Aside from halving its processing time and increasing analyte capacity fivefold, the 3D builds upon the humbler Bio-Plex 200 series by extending support to 384-well plates and robotics interfacing.

Includes Power Cable

From a Professional Dealer to Your Lab

New Life Scientific is an experienced scientific vendor with a history of positive customer experiences. You can have confidence in our technical evaluations and our warranty knowing that we have in-house technicians who inspect, test, service, and repair the various instruments we receive.

After examination and thorough cleaning, products often leave our shop meeting manufacturer specs. When you buy from New Life Scientific, you're free to contact us at any time for post-sales support concerning any questions or issues that may arise, even after your warranty expires.






Serial No.


Mfg. Date

October 2011

Power Requirements

100-120V, 6.0A, 50/60Hz, or

200-240V, 3.0A, 50/60Hz

Assay Read Time

<20 min

Multiplexing capability

Up to 500 analytes

Plate compatibility

96- or 384-well

Automation ready


Dynamic range

4.5 logs

Dimensions (W x D x H)

23" x 25.7" x 18" (58.4 x 63.5 x 54.7 cm)


200 lb (91 kg)

Plate heater operating range

35-60°C (95-131°F)

System warm-up

30 min

Sheath fluid pressure

8-15 psi

Sample injection rate

2 µl/sec

Sample uptake volume

20-200 µl

Classification laser

635 nm

Reporter laser

532 nm