Tel: 567-221-0615 | Contact Us | Hours 9:00AM-5:30PM Mon-Fri

My Cart:

0 item(s)
You have no items in your shopping cart.

0

Welcome to our online store!

Beckman Optima XL-90 Ultracentrifuge Floor Centrifuge 90K RPM 355896 Warranty

Tested 80,000 rpm. No Rotor. Includes 90-Day Warranty.
$4,595.99
AdID: 15148

Availability: In stock

Details

Fully-Functional Beckman 90,000 RPM
Ultracentrifuge in Good Condition - Tested and
Ready for Operation

Guaranteed with a 90-Day Warranty

This Beckman Optima XL-90 Ultracentrifuge has been thoroughly inspected and tested
by our technician who specializes in centrifuges. More than 10 different rotors were
tested in this centrifuge at a variety of set speeds, including 80,000 rpm, and all
reached their maximum speeds without a problem.


This ultracentrifuge has a maximum speed specification of 90,000 rpm, but you will
need a rotor rated for that speed if you wish to process samples at this maximum rpm.


Want to add a rotor to your XL-90?

This centrifuge doesn’t come with a rotor, but we have plenty of compatible rotors in
stock so please don’t hesitate to contact us about adding a rotor to your purchase.


Good Condition with Exceptionally Nice Rotor Chamber

This ultracentrifuge has been inspected and cleaned to give you the best appearance
possible from this pre-owned floor centrifuge. There are a few scuffs and minor stains
on the exterior, but it shines where it counts and that’s in the rotor chamber where it’s
in exceptionally good condition.


The ‘STOP’ button on the control panel was damaged, but we repaired the button and
it now functions normally.


Excellent Performance - Tested by Technician to 80,000 RPM

Thoroughly inspected and tested by our resident centrifuge specialist, this centrifuge
was tested to a variety of set speeds with more than 10 different rotors, all reaching
their maximum speeds with no problem or unusual noise. Also, the refrigeration,
vacuum, all settings, control panel buttons, display screen, and door lock have been
tested.


We were able to test this ultracentrifuge to 80,000 rpm, very close to its maximum
speed specification of 90,000 rpm, and we have no doubt it will reach its maximum
speed. You will need a rotor rated for 90,000 rpm to process samples at that speed.


The following tests were performed:

- Tested centrifuge to 80,000 rpm
- Refrigeration worked well during runs
- Vacuum held properly during runs at 0 microns
- All control panel buttons tested
- Display screen is clear and bright
- Printer results tested
- Accel & Decel profiles tested
- Time setting tested
- Door lock checked
- Casing inspected and cleaned

Experienced Centrifuge Dealer

New Life Scientific is no stranger to centrifuges. Over the past four years we have
dealt in and worked on a wide variety of benchtop and floor centrifuges from the
top manufacturers, including Eppendorf, Beckman, and Sorvall/Thermo.


You can have confidence in our technical evaluations and our warranty knowing that
we have actual in-house technicians who inspect, test, service, and repair centrifuges.
After their examinations and being cleaned inside and out, they often leave our shop
meeting manufacturer specs.


When you buy from us, you’re not just buying a centrifuge. You also gain a resource
for after-sales support for any questions or issues that may arise, even after your
warranty expires.


90-Day Warranty for your Peace-of-Mind

We realize that buying pre-owned can be unnerving, so we include a 90-day warranty
on our equipment to protect you against any equipment failure or defects. If anything
goes wrong, our in-house support is only a phone call away.


Specifications

Manufacturer

Beckman

Mfg. Date

1990

Model

XL-90

Cat. No.

355896

Serial No.

X0M908

Maximum Speed

90,000 rpm

Speed Control

± 20 rpm

User Programs

9

Drive

Air Cooled

Temperature Range

0°C to 40°C with 1°C increments

Temperature Control

± 0.5°C of set

Ambient Operating Range

15°C to 40°C

Voltage

200-240 V, 50/60 Hz, 20 A

Dimensions (W x D x H)

37 x 26.5 x 47.75 in

Weight

465 kg (1,025 lb)