Tel: 567-221-0615 | Contact Us | Hours 9:00AM-5:30PM Mon-Fri

My Cart:

0 item(s)
You have no items in your shopping cart.


Welcome to our online store!

Used: Beckman Optima XL-80-B Ultracentrifuge Floor Centrifuge 352024 w/ Warranty

Tested 80,000 rpm. Serviced & Backed by 90-Day Warranty

Quick Overview

Backed by a 90-Day Warranty - Your instrument works, or we repair, refund, or replace.

Used - A pre-owned and tested product that may show signs of wear.

Flat-Rate Freight ($285) - The instrument is web-wrapped to a pallet with shrink-wrap.

AdID: 16288

Availability: In stock


Beckman Optima XL-80-B Ultracentrifuge in Good Condition and Meets Specification

Fully inspected, tested, and serviced to run as smoothly as possible, this used ultracentrifuge from Beckman's time-tested Optima series will deliver solid performance at a fraction of the price of similar centrifuges.

In-Depth Testing & Service to Ensure Peak Performance

After being cleaned upon arrival, we further serviced this centrifuge by vacuuming dust out of the interior, performing a vacuum calibration, and changing the vacuum oil and diffusion pump oil.

Then, our testing confirmed that:

- the centrifuge spins up to its max speed of 80k rpm without issue,
- its vacuum held under 10 millitorr,
- its temperature decreased during the run,
- door latch and all buttons work properly

In short, this XL-80 met manufacturer specifications across the board.

This Optima XL-80 is in good condition, bearing only minor signs of wear, such as light scuffs and yellowing, across the exterior and in the chamber. The unit has been maintained well and our service process gave its cosmetics an extra boost.

Please note that this centrifuge is configured for 208v.

Want to add a rotor to your order?

This centrifuge doesn't come with a rotor, but we do have compatible ones in stock -- so please don't hesitate to contact us if you'd like to add one to your purchase!

From an Experienced Centrifuge Dealer to your Lab

New Life Scientific is no stranger to centrifuges. Over the past four years, we have dealt in and worked on a wide variety of benchtop and floor centrifuges from the top manufacturers, including Beckman, Sorvall/Thermo, and Eppendorf.

You can have confidence in our technical evaluations and our warranty knowing that we have actual in-house technicians who inspect, test, service, and repair centrifuges. After their examinations and being cleaned inside and out, they often leave our shop meeting manufacturer specs.

When you buy from us, you’re not just buying a centrifuge. You also gain a resource for after-sales support for any questions or issues that may arise, even after your warranty expires.






Catalog No.


Serial No.


Mfg. Year


Max. Speed

80,000 rpm

Power Requirements

200-240V, 50/60Hz, 20 Amps

Dimensions (W x D x H)

37" x 27" x 47.75"