Tel: 567-221-0615 | Contact Us | Hours 9:00AM-5:30PM Mon-Fri

My Cart:

0 item(s)
You have no items in your shopping cart.


Welcome to our online store!

Beckman L8-80M Ultracentrifuge 80K RPM Refrigerated Floor Centrifuge w/ Warranty

Fully-Functional and Protected by our 90-Day Warranty
AdID: 14881

Availability: In stock


Fully-Functional Beckman Ultracentrifuge
Speed and Refrigeration to Manufacturer Spec.

Protected by our 90-Day Warranty

A time-tested and proven ultracentrifuge, this Beckman L8-80M has been thoroughly
inspected by our technical staff and tested to confirm it reaches 80,000 rpm, holding
at +1°C and 001 microns during operation.

With our 90-day warranty and knowledgeable testing, you can buy with confidence
knowing you’ll get a fully-functional centrifuge that will work on day-one and will be
protected against unexpected issues.

Want to add a rotor to your ultracentrifuge?

This centrifuge doesn’t come with a rotor, but we have compatible rotors in stock so
please don’t hesitate to contact us about adding a rotor to your purchase.

Thoroughly Inspected and in Good Physical Condition

The rotor chamber, control panel, and the exterior surfaces of this centrifuge are
clean and in good physical condition with minor wear and some scuffs and scratches
on the exterior.

Reliable Speed and Cooling for your Samples

Our technical staff inspected and tested this centrifuge to confirm its functionality,
guaranteeing it will hold a steady low temperature during operation at top speeds.
The refrigeration system was able to keep the rotor chamber at +1°C during
operation at 80,000 rpm.

The following tests were performed:

- Tested centrifuge to 80,000 rpm with no problem
- Refrigeration held at +1°C during operation at 80,000 rpm
- Vacuum held at 001 microns during operation
- Checked accel/decel profiles

The following services were performed:

- Centrifuge surfaces cleaned
- Inside of centrifuge blown out
- Door seal greased
- Replaced vacuum hose

From Experienced Centrifuge Dealer to your Facility

New Life Scientific is no stranger to centrifuges. Over the past four years we have
dealt in and worked on a wide variety of benchtop and floor centrifuges from the
top manufacturers, including Eppendorf, Beckman, and Sorvall/Thermo.

You can have confidence in our technical evaluations and our warranty knowing
that we have actual in-house technicians who inspect, test, service, and repair
centrifuges. After their examinations and being cleaned inside and out, they
often leave our shop meeting manufacturer specs.

When you buy from us, you’re not just buying a centrifuge. You also gain a resource
for after-sales support for any questions or issues that may arise, even after your
warranty expires.

90-Day Warranty for your Peace-of-Mind

We realize that buying pre-owned can be unnerving, so we include a 90-day warranty
on our equipment to protect you against any equipment failure or defects. If anything
goes wrong, our in-house support is only a phone call away.

Support for Instrument Longevity

We also offer continued support, including consulting and technical questions. We may
be able to exchange or replace units in a pinch.






Serial No.


Maximum speed

80,000 rpm

Power Requirements

208 V, 60 Hz

Dimensions (W x D x H)

38.5 x 27.5 x 50 in