Tel: 567-221-0615 | Contact Us | Hours 9:00AM-5:30PM Mon-Fri

My Cart:

0 item(s)
You have no items in your shopping cart.

0

Welcome to our online store!

Beckman Coulter J2-21M/E High Speed Refrigerated Floor Centrifuge 348287

Tested 20,000 rpm, holds -4°C. Includes 90-Day Warranty
$3,199.95
AdID: 15361

Availability: In stock

Details

Beckman High Speed Floor Centrifuge - Tested
to 20,000 RPM with Reliable Refrigeration

Guaranteed with a 90-Day Warranty

A time-tested and proven high speed refrigerated floor centrifuge, this Beckman
J2-21M/E has been thoroughly inspected by our technical staff and tested to confirm
it reaches 20,000 rpm, with refrigeration holding the rotor chamber at -4°C during
operation. This centrifuge has also been proven to hold the rotor chamber at -20°C
when operating at 15,000 rpm.


With our 90-day warranty and knowledgeable testing, you can buy with confidence
knowing you’ll get a fully-functional centrifuge that will work on day-one and will
be protected against any unexpected issues.


Want to add a rotor to your J2-21M/E?

This centrifuge doesn’t come with a rotor, but we have some compatible rotors in
stock so please don’t hesitate to contact us about adding a rotor to your purchase.


Reliable Floor Centrifuge in Good Condition for your Lab

This centrifuge has been proven time and time again through many years of service
and it still hasn’t quit. It continues to provide reliable high speed centrifugation at
low temperatures just as good as the newer models.


Over the years it has developed a few minor cosmetic flaws, but none of it affects
the performance. The rotor chamber has some small spots of discoloration and the
centrifuge exterior has some scuffs, scratches, and small bits of plastic chipped off
the lid. That’s it. Nothing out of the ordinary.


Thoroughly Inspected and Tested by Technical Staff

Our technical staff inspected and tested this centrifuge, confirming it functional and
guaranteeing it to hold a steady low temperature during operation at top speeds.
The refrigeration system holds the rotor chamber at -4°C during operation at 20,000
rpm and at -20°C during operation at 15,000 rpm.


The following tests and services were performed:

- Tested centrifuge to 20,000 rpm, holding -4°C in rotor chamber
- Tested centrifuge to 15,000 rpm, holding -20°C in rotor chamber
- Door latch tested and working
- Vacuum tested and working
- Accel/Decel tested and working
- Control panel and display works
- Centrifuge exterior and interior cleaned

From Experienced Centrifuge Dealer to your Facility

New Life Scientific is no stranger to centrifuges. Over the past four years we have
dealt in and worked on a wide variety of benchtop and floor centrifuges from the top
manufacturers, including Eppendorf, Beckman, and Sorvall/Thermo.


You can have confidence in our technical evaluations and our warranty knowing that
we have actual in-house technicians who inspect, test, service, and repair centrifuges.
After their examinations and being cleaned inside and out, they often leave our shop
meeting manufacturer specs.


When you buy from us, you’re not just buying a centrifuge. You also gain a resource
for after-sales support for any questions or issues that may arise, even after your
warranty expires.


90-Day Warranty for your Peace-of-Mind

We realize that buying pre-owned can be unnerving, so we include a 90-day warranty
on our equipment to protect you against any equipment failure or defects. If anything
goes wrong, our in-house support is only a phone call away.


Specifications

Manufacturer

Beckman

Mfg. Date

1990

Model

J2-21M/E

Cat. No.

348287

Serial No.

J2G908

Power requirements

208 V, 60 Hz, 30 A

Dimensions (W x D x H)

28 x 32 x 50 in