Tel: 567-221-0615 | Contact Us | Hours 9:00AM-5:30PM Mon-Fri

My Cart:

0 item(s)
You have no items in your shopping cart.


Welcome to our online store!

Used: Beckman Coulter Microfuge 22R Refrigerated Benchtop Centrifuge w/ F241.5P Rotor

Tested to Max 14000 RPM and Backed by 90-Day Warranty

Quick Overview

Used - A pre-owned and tested instrument that may show signs of wear.

U.S. & Canada Freight ($285) - Exclusive shipping to the U.S. and Canada. Freighted products below $1,500 are assigned this profile.

Backed by a 90-Day Warranty - Your instrument works, or we repair, refund, or replace.
AdID: 16376

Availability: In stock


Beckman Coulter Microfuge 22R Refrigerated Benchtop Centrifuge in Good Condition with a F241.5P Fixed-Angle Rotor

This Microfuge 22R benchtop centrifuge from Beckman Coulter looks great and performs just as well. It reaches the maximum speed specification of 14,000 rpm with ease and holds the rotor chamber at -10°C. After thoroughly inspecting and testing this centrifuge, our technical staff also performed preventative maintenance on the body by replacing the gas spring and greasing the door latches. Everything’s ready to go!

With our 90-day warranty and knowledgeable testing, you can buy with confidence knowing you’ll get a fully-functional centrifuge that will work on day-one and will be protected against any unexpected issues.

You Will Receive the Following Items

- Beckman Coulter Microfuge 22R Centrifuge
- Beckman Coulter F241.5P Fixed-angle rotor
- Power Cable

Reliable Centrifuge in Good Condition for your Lab

This centrifuge was manufactured in 2010 and it still looks great on the benchtop. Each component has been inspected and found to be in good physical condition.

Tested to Max 14,000 rpm and PM Performed

This centrifuge was thoroughly tested by our technical staff, confirming it to reach the manufacturer maximum speed specification of 14,000 rpm. While running at 14,000 rpm, the rotor chamber held steady at -10°C.

To ensure this centrifuge delivers excellent performance time and time again, preventative maintenance was performed, which included the replacing of the gas spring and greasing of the door latch assemblies.

The following tests were performed:

- Tested to max 14,000 rpm: PASSED
- Tested refrigeration, maintained max -10°C: PASSED
- Tested control panel: PASSED
- Tested lid function: PASSED

From an Experienced Centrifuge Dealer to your Lab

New Life Scientific is no stranger to centrifuges. Over the past four years we have dealt in and worked on a wide variety of benchtop and floor centrifuges from the top manufacturers, including Eppendorf, Beckman, and Sorvall/Thermo.

You can have confidence in our technical evaluations and our warranty knowing that we have actual in-house technicians who inspect, test, service, and repair centrifuges. After their examinations and being cleaned inside and out, they often leave our shop meeting manufacturer specs.

When you buy from us, you’re not just buying a centrifuge. You also gain a resource for after-sales support for any questions or issues that may arise, even after your warranty expires.



Beckman Coulter


Microfuge 22R

Cat. No.


Serial No.


Mfg. Date

January 12, 2010

Set Speed

500 to 14,000 rpm

Set Time

to 30 min, continuous run, or pulse (short run)

Temperature Setting

-10 to +40°C (in 2°C increments)

Operating Temperature

+4°C to ambient

Power Requirements

120 V, 60 Hz, 6.9 A

Dimensions (W x D x H)

14.5 x 23 x 12 in


41.0kg (90.4 lb)