Tel: 567-221-0615 | Contact Us | Hours 9:00AM-5:30PM Mon-Fri

My Cart:

0 item(s)
You have no items in your shopping cart.

0

Welcome to our online store!

Beckman Coulter Avanti J-25 High Speed Refrigerated Floor Centrifuge 25,000 RPM

Tested to 21,000 rpm at -20°C. Includes 90-Day Warranty
$4,895.95
AdID: 14427

Availability: In stock

Details

Fully-Functional Beckman Coulter Avanti J-25
High Speed Floor Centrifuge - Tested to
Manufacturer Speed and Cooling Specifications

Every week here at the New Life Scientific tech shop, we are inspecting, testing,
and servicing centrifuges such as this Beckman Coulter Avanti J-25, offering you
a wide variety of pre-owned centrifuges with a clear understanding of their condition
and functionality. Also, this centrifuge doesn’t come with a rotor so you don’t have
to pay for a rotor that you don’t need.


Our technician inspected and tested this floor centrifuge, confirming it to reach
both the manufacturer speed and cooling specifications. This centrifuge reaches
its maximum speed of 25,000 rpm and holds at the lowest possible temperature
setting of -20
°C during operation at 21,000 rpm.


Clean and in good physical condition, this centrifuge only has some minor wear
and a stain on the upper left section of the front panel.


Inspected and Tested by Technician

In addition to testing the centrifugation and cooling features of this centrifuge to
manufacturer spec, our technician ensured that all features are working and
gave this centrifuge a clean bill of health. No problems or unusual noises were
detected.


The following tests were performed:

- Tested centrifuge to maximum speed of 25,000 rpm
- Refrigeration held at -20°C during operation at 21,000 rpm
- Min/max accel and decel profiles tested
- Rotor identification tested
- Timer tested
- Door release mechanism tested
- All control panel buttons and knobs tested
- Centrifuge housing cleaned

Experienced Centrifuge Dealer

New Life Scientific is no stranger to centrifuges. Over the past four years we
have dealt in and worked on a wide variety of benchtop and floor centrifuges
from the top manufacturers, including Eppendorf, Beckman, and Sorvall/Thermo.


You can have confidence in our technical evaluations and our warranty knowing
that we have actual in-house technicians who inspect, test, service, and repair
centrifuges. After their examinations and being cleaned inside and out, they
often leave our shop meeting manufacturer specs.


When you buy from us, you’re not just buying a centrifuge. You also gain a
resource for after-sales support for any questions or issues that may arise,
even after your warranty expires.


G-Forces are G-Forces – Buy Pre-Owned

The g-forces this centrifuge exerts are just as real as those exerted by a new
one. At over $20,000 for a new floor centrifuge this centrifuge is priced at less
than 20% of a new centrifuge.


90-Day Warranty for your Peace-of-Mind

We realize that buying pre-owned can be unnerving, so we include a 90-day
warranty on our equipment to protect you against any equipment failure or
defects. If anything goes wrong, our in-house support is only a phone call away.


Specifications

Manufacturer

Beckman Coulter

Model

J-25

Cat. No.

363102

Serial No.

JHY98K25

Speed range

100 to 25,000 rpm

Temperature range

-20ºC to +40ºC

Cooling fluid

R-404A (HFC)

Voltage

200/208/240 V, 24 A, 50/60 Hz

Power cable length

6 ft.

Dimensions (W x D x H)

28 x 34 x 45.5 in