30% to 70% Off Select Instruments - Click Here

Tel: 567-221-0615 | Contact Us | Hours 9:00AM-5:30PM Mon-Fri

My Cart:

0 item(s)
You have no items in your shopping cart.


Welcome to our online store!

Beckman Coulter Allegra X-12R Refrigerated Benchtop Centrifuge X12R 392302

Tested to Manufacturer Specs. Backed by 90-Day Warranty
$3,285.95 $2,300.16
AdID: 14350

Availability: In stock

Sale: 40% Off


Fully-Functional, Refrigerated Centrifuge
- Tested to perform at Manufacturers Specification
of 3,750 RPM at -10C

Every week here at the New Life Scientific tech shop, we are inspecting, testing,
and servicing benchtop centrifuges such as this Allegra X-12R, offering you a wide
variety of pre-owned centrifuges with a clear understanding of their condition and

Our technician inspected and tested this centrifuge, confirming it to reach the rotor
maximum speed of 3,750 rpm, holding at -10
C during operation. It has a maximum
speed of 10,200 rpm when paired with compatible fixed-angle rotor.

We found this centrifuge to be in good physical condition overall, with some
noticeable cosmetic wear on the front and left side panel, including the lid. There
is a scratch on the decel button, but it still actuates normally.

Tested to Manufacturers Specifications

In addition to testing the centrifugation and cooling features of this centrifuge,
our technician ensured that other key features were working and gave the centrifuge
a clean bill of health.

The following tests and services were performed:

- Tested to rotor maximum speed of 3,750 rpm
- Refrigeration reached -17C when idle and held at -10C during operation
- Min/max accel and decel profiles tested
- Pulse mode tested
- Door lock and unlock tested
- All control panel buttons tested
- Cleaned housing and condenser

Experienced Centrifuge Dealer

New Life Scientific is no stranger to centrifuges. Over the past four years we have
dealt in and worked on a wide variety of benchtop and floor centrifuges from the
top manufacturers, including Eppendorf, Beckman, and Sorvall/Thermo.

You can have confidence in our technical evaluations and our warranty knowing
that we have actual in-house technicians who inspect, test, service, and repair
centrifuges. After their examinations and being cleaned inside and out, they often
leave our shop meeting manufacturer specs.

When you buy from us, youre not just buying a centrifuge. You also gain a
resource for after-sales support for any questions or issues that may arise, even
after your warranty expires.

90-Day Warranty for your Peace-of-Mind

We realize that buying pre-owned can be unnerving, so we include a 90-day
warranty on our equipment to protect you against any equipment failure or
defects. If anything goes wrong, our in-house support is only a phone call away.




Beckman Coulter

Mfg. Date



Allegra X-12R

Cat. No.


Serial No.


Maximum Speed

10,200 rpm (Fixed-angle)

3,750 rpm (Swinging-bucket)

Maximum g-Force

11,400 g (Fixed-angle)

3,270 g (Swinging-bucket)

Maximum Capacity

4 x 750 mL

Run Time

Time (Up to 99 hrs, 59 min)

Hold, Pulse (Short Run)

Accel/Decel Profiles


Set Temperature Range

-10C to +40C

Ventilation clearances (sides and rear)

3 in


208V, 9A, 60Hz

Dimensions (W x D x H)

30 x 26.5 x 16 in

Weight without Rotor

121 kg (266.76 lbs)

X-12 Compatible Rotors



Max RCF (x g)

Number of Tubes x Nominal Capacity




6 x 100 mL




4 x 750 mL




4 x 750 mL